Position：Home > Product > Core Equipment > Extraction Tank
The equipment is suitable for Chinese Traditional Medi-cine,foodstuff and chemical industry.It can be applied to following process:normal pressure or compression dnug-decoting,warm water soak,heat retum,coercive circulation,infitration,aromatic oll extracting and organic solvent recovery etc.High eltciency and easy to operate.There is barrel,conical,oblique conical and fungiform types can be chosen according to various productian process.
Hotline： 027-88161243TQM mushroom extraction tank
usage
The equipment is suitable for Chinese Traditional Medi-cine,foodstuff and chemical industry.It can be applied to following process:normal pressure or compression dnug-decoting,warm water soak,heat retum,coercive circulation,infitration,aromatic oll extracting and organic solvent recovery etc.High eltciency and easy to operate.There is barrel,conical,oblique conical and fungiform types can be chosen according to various productian process.
TQZ type barrel extracing extracting tank TOM type mushroom extracting tank
Mainparameters
|
Tvpe Paramete |
TQ0.5 |
TQ1. |
TQ2.0 |
TQ3.0 |
TO4.0 |
TQ5.0 |
TQ6.0 |
TO8.0 |
|
L capact 560 130 2300 3600 440 556 6500 8900 |
||||||||
|
MPa design pressure inside tank 0.09 |
||||||||
|
Mpa dosign pressure insido jadket 0.3 |
||||||||
|
m heating area 2.1 4 5 68 7.3 8.5 9.5 11 |
||||||||
|
m condensing area 3.0 5.0 5.0 80 8.0 10.0 10.0 2.0 |
||||||||
|
m cooling area 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 |
||||||||
|
m iltering arsa 0.25 0.25 0.25 0.25 0.25 0.50 0.50 0.50 |
||||||||
|
mm esidue discharging door 600 800 1000 1200 1200 1300 1400 1500 |
||||||||
|
mm manhole 300 300 400 400 450 450 450 500 |
||||||||
|
kg/h sbeam consumption 100 180 225 300 330 380 420 495 |
||||||||
|
T/h cooling water consumption 2.6 4.2 4.2 68 6.8 8.5 8.5 10 |
||||||||
Main parameters
Redesign and develop a new generation of extraction tanks based on their characteristics. There have been significant improvements in heating, filtering, slag discharge, and sealing of slag discharge doors, which have been widely recognized by users for many years.
Design concept
Equipment performance optimization, good operability, energy saving and environmental protection, overall aesthetics
component
The equipment consists of a tank, a demister, a condenser, a cooler, an oil-water separator, an oil collection cylinder, a dual filter, a transfer pump, and internal pipelines.
Component section
The tank is equipped with CIP cleaning automatic rotating spray ball, thermometer, pressure gauge, explosion-proof sight glass, sight glass, quick feed inlet, etc., ensuring easy operation and compliance with GMP standards. The inner cylinder of the device consists of two parts: 304 and 316L.
working principle
Add solvent to the extraction tank, soak it, and heat it with jacket steam. The liquid medicine inside the tank boils. Depending on the boiling point of each solvent, the low boiling point components first boil and become secondary steam, which is then condensed and cooled until oil-water separation. Whether to reflux or discharge can be determined according to the process conditions. The oil-water separator utilizes the different densities of oil and water to separate them into upper and lower layers, thereby obtaining volatile oil. Additionally, due to the concentration difference in the upper, middle, and lower parts of the main tank during the heating process, the liquid can be circulated back to the upper part of the main tank through a filter and pump, achieving dynamic extraction.
